Preparation - JVC AV-14A10,AV-14F10, AV-20N10, AV-21A10, AV-21D10, AV-21F10 Instructions Manual

Preparation

1. Connecting the aerial and external devices
Notes: .........................................................................................................................
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either
jack is output through both. You cannot provide input to both the front and rear jacks at the
same time. Disconnect one input, or use one of the jacks as an output jack only (for
monitoring or recording).
• The rod aerial is supplied with the AV-14A10 and AV-14F10.
....................................................................................................................................
I Connecting the aerial and VCR
Connecting the aerial
To install rod aerial:
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VHF/UHF outdoor aerial
Connecting the aerial and VCR
VHF/UHF outdoor aerial
VIDEO AUDIO
IN
OUT
2
To video
To RF
output
output
1
To aerial input
Indoor aerial
Rod aerial
• Illustration of AV-14F10.
VIDEO AUDIO
IN
OUT
3
To audio
output
VCR
• Illustration of AV-14F10.
3