JVC AV-14A10,AV-14F10, AV-20N10, AV-21A10, AV-21D10, AV-21F10 Instructions Manual page 7

I Manual Channel Preset
You can manually preset the desired TV channels to the desired channels.
1.
Press MENU
then select MANUAL CH PRESET .
2.
Press MENU –/+.
The sub-menu is displayed.
• The channel No. is displayed as a PR No.
3.
Press MENU –/+ to select the channel
number.
4.
Press VOLUME –/+ to start searching for
the TV channel.
or is displayed on the screen.
When a TV channel is received, the
station is preset to the currently selected channel No.
• If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the
TV channel you want to preset.
• To stop the Manual Channel Preset function, press any button other than the VOLUME
–/+ button.
If the picture is not clear:
Use the Fine function to fine-tune the TV station.
1. Press MENU
2. Hold VOLUME –/+ down to fine-tune the TV station
so that the best image is displayed on screen.
or indicates that the TV station is being
fine-tuned.
5.
Press MENU
6.
Press VOLUME –/+ to select the appropriate
sound system.
• For the sound systems in each country or region, refer to the
table "Broadcasting systems" on page 19.
7.
Press MENU
8.
Repeat steps 3 to 7 if you want to preset another TV station to a
channel.
9.
Press DISPLAY to turn the display off.
to display the MENU 3 menu,
/
to select FINE .
/
to select SOUND SYSTEM .
/
to select MANUAL .
/
AUTO CH PRESET
MANUAL CH PRESET
LANGUAGE
SELECT BY
OPERATE BY -+
Channel
SELECT BY
No.
PROGRAM BY -+
SEARCH BY VOL-+
or display goes out, and the TV
SELECT BY
PROGRAM BY -+
FINE
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+
Preparation
MENU 3
ENGLISH
EXIT BY
D I SPLA Y
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
PR 1 VL
EXIT BY
D I SPLA Y
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
PR 3 VL
EXIT BY
BY VOL-+ D I SPLA Y
MANUAL
FINE
SKIP NO
SOUND SYSTEM B/G
EXIT
PR 3 VL
EXIT BY
D I SPLA Y
7