NOTICE:
Always empty the water tank after use.
OPERATION
SWITCHING ON AND OFF - Fig. F
NOTICE:
When the steam cleaner is first turned on
is ready to use the water reservoir will glow blue. It takes
approximately 15 seconds for the steam cleaner to heat up.
button (1).
button.
NOTICE:
Never leave the steam cleaner in one spot on any surface for any period of
time. Always place the steam cleaner in the upright position when stationary and make sure
the steam cleaner is turned off when not in use.
NOTICE:
Always empty the water tank after use.
NOTICE:
This unit will kill 99.9% of bacteria and germs when used in accordance with
this manual and with the micro fiber pad fitted and a continuous run time of 90 seconds.
GENERAL USE
CAUTION:
Never use the steam cleaner without an attachment.
WARNING:
It is important to monitor the water level in the water tank. To refill the
water tank and continue to sanitize/ clean, see Filling the Water Tank section.
NOTICE:
To effectively sanitize an area, the lift and reach head with microfiber pad must be used.
NOTICE:
Never leave the steam cleaner in one spot on any surface for any period of time.
Always place the steam cleaner in an upright position when stationary and make sure the steam
cleaner is turned off when not in use.
Do not use chemical cleaners with your steam cleaner. To remove stubborn stains
from vinyl or linoleum floors, you can pre-treat them with a mild detergent and some
water before using the steam cleaner.
HAND HELD STEAM CLEANING
steam cleaner to heat up.
seconds steam will start to come out of the accessory.
NOTICE:
If the system has been run dry it may take up to 30 seconds to prime the
system on first use.
NOTICE:
During use you may turn off the steam pump by releasing the trigger switch,
this convenient feature will allow you to place the steam cleaner down for a short time so
that you may move items or furniture, then continue cleaning without the need to switch
the appliance off.
AFTER USE
HINTS FOR OPTIMUM USE
6
F
.