Set Lock Code - JVC I' Art Pro AV-32P903 User Manual

V-Chip

Set Lock Code

Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes
pre-set with a Lock Code of "0000". You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Press the M
ENU
To SET LOCK CODE
To operate
The lock icon
Press Z to access the Lock Code
ERO
SET LOCK CODE
LOCK CODE
SELECT BY
OPERATE BY
The first digit will be highlighted
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
To FINISH
To save settings and exit
Your Lock Code is now set.
NOTE:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
36
button
appears
0000
FINISH
EXIT BY
EXIT