System Shutdown; Boot Menu - NETGEAR ReadyNAS Ultra 2 Hardware Manual

Readynas ultra, ultra plus, and pro series
Hide thumbs Also See for ReadyNAS Ultra 2:
Table of Contents

Advertisement

System Shutdown

You can shut down your unit in these ways:
Using the Power button:
Preferred shutdown:
If the status display screen is not lit, press the Power button three times initiate a
graceful shutdown.
If the status display screen is lit, press the Power button two times to initiate a
graceful shutdown.
Forced shutdown. If the unit is hung, press the Power button and hold for 5 seconds
to force shutdown.
Using FrontView. For information about using FrontView to shut down your ReadyNAS
Ultra series or ReadyNAS Ultra Plus series storage system, see the ReadyNAS for Home
Software Manual. For information about using FrontView to shut down your ReadyNAS
Pro series storage system, see the ReadyNAS for Business Software Manual. Both
documents are available at http://www.readynas.com/?cat=40.

Boot Menu

Use the boot menu to restart or troubleshoot your ReadyNAS unit. Your unit has the following
boot modes:
Normal. Initiates a normal boot process, just like booting using the Power button.
Factory default. Initiates a short disk test that takes approximately 5 minutes, then
begins a 10-minute time-out period waiting for RAIDar. During the 10-minute time-out
period, the system can be powered off safely without causing any data loss. After 10
minutes, or if you select the factory default option with RAIDar during the time-out period,
the factory default process begins.
WARNING!
The factory default reboot process resets the unit to factory
settings, erases all data, resets all defaults, and reformats the disk
to X-RAID2.
OS reinstall. Reinstalls the firmware from the internal flash to the disks. Use the OS
reinstall boot mode when the system crashes and corrupts some configuration files. OS
reinstall boot mode also resets some settings on your unit, such as Internet protocol
settings and the administrator password, to defaults.
Tech support. Boots into a low-level diagnostic mode. Use the tech support boot mode
only when instructed to do so by a NETGEAR Technical Support representative.
ReadyNAS Desktop Storage Systems
ReadyNAS Ultra 6, Ultra 6 Plus, Pro 6
26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents