Status Information - NETGEAR ReadyNAS Ultra 2 Hardware Manual

Status Information

You can obtain information about the status of your unit by reviewing the indicators listed in
the following table.
Item
Power button and LED
Disk LEDs (1, 2, 3, 4)
Disk activity LED
Rear panel Ethernet port
LEDs
Status display screen
ReadyNAS Desktop Storage Systems
Description
Press this button to turn on the ReadyNAS. The LED has these states:
• Blinking. Booting
• Blue. Powered on
• Off. Powered off
Each disk bay has an LED associated with it, in numerical order from left to right,
along the top of the front panel of the unit. The disk LEDs have these states:
• On. Power is on and the disk is operating normally.
• Blinking. The disk failed or is resynchronizing. See the status display screen
for details.
• Off. The disk bay is empty.
The disk activity LED has these states:
• Blinking green. A disk is active.
• Off. No disks are active.
Two LED status indicators are built into these ports. One LED indicates port
activity. The other LED indicates connection speed as follows:
• Green. The port is operating at 1,000 Mbps.
• Amber. The port is operating at 100 Mbps.
• Off. The port is operating at 10 Mbps.
Displays messages about the status of your unit. Note that the status display
screen goes to sleep to prevent burn-in; to wake it, press the Power button. If the
unit reports an abnormal operation or error, the status display screen stays on.
ReadyNAS Ultra 4, Ultra 4 Plus, Pro 4
18