Table of Contents
Advertisement
Security Setting
This page pops up after clicking the Security Setting button. Please follow the instructions
below:
1
3
4
5
1. Authentication Type: Select to be open, shared, WPA-PSK, WPA2-PSK, or WPA
PSK/WPA2-PSK system.
2. Encryption Type: Select an encryption type from the drop list.
3. WPA Pre-shared Key: A shared string between AP and STA. For WPA-PSK
authentication mode, this field must be filled with character longer than 8 and less
than 32 lengths.
4. Group Rekey Interval: Only valid when using WPA-PSK encryption algorithm.
The key will change compliance with seconds or beacon that user set.
5. WEP Key: Only valid when using WEP encryption algorithm. The key must match
the key on AP. There are several formats to enter the keys.
a. Hexadecimal (40bits): 10 Hex characters.
b. Hexadecimal (128bits): 32Hex characters.
c. ASCII (40bits): 5 ASCII characters.
d. ASCII (128bits): 13 ASCII characters.
Version: 2.0
40
2
Advertisement
Table of Contents
