Table of Contents
Advertisement
WMM
This page allows users to activate the WMM function for this device. Please note that this function
only works while connecting to a WMM compatible device.
Items
WMM Enable
WMM - Power Save Enable
Direct Link Setup Enable
MAC Address
Timeout Value
Apply / Tear Down
Version: 2.0
Information
Enable Wi-Fi Multi-Media.
Enable WMM Power Save. Please enable WMM before
configuring this function.
Enable DLS (Direct Link Setup). Please enable WMM before
configuring this function.
Fill in the blanks of Direct Link with MAC Address of STA.
Time of automatically disconnect after some seconds. The
value is integer. The integer must be between 0~65535. It
represents that it always connects if the value is zero.
Default value of Timeout Value is 60 seconds.
After fill in the "MAC Address" and "Timeout Value", click
"Apply" button to save your configuration. The result will
appear in the following
the configuration, please select the configuration in the
blanks and then click "Tear Down" button.
22
"DLS Status" blanks. To remove
Advertisement
Table of Contents
