Table of Contents
Advertisement
CCX
This page is available for Vista user only. It provides CCX configurations to this adapter. Please
refer to the following chart for definitions of each item.
Items
Enable CCX (Cisco Compatible
extensions)
Turn on CCKM
Enable Radio Measurements
Non-Serving Channel
Measurements limit
Network EAP
Enable RF Roaming
Enable CAC (Tolerance)
CAC
Diagnosis
Radio On/Off
Click on the button to enable/disable wireless connection status.
Connected:
Disconnected:
Version: 2.0
Information
Select to enable CCX. This function can only be applied
when connecting to a Cisco compatible device.
Mark to enable CCKM.
Mark to enable channel measurement every 0~2000
milliseconds.
Mark to revise the channel measurement.
Enable the NetwrokEAP authentication algorithm.
Enable RF roaming function
Enable the call admission control
There are four selections: ADDTS (Directly send TS), DELTS,
and RESET. Select an item from the drop down list and then
click on the
Select a profile which the user wants to diagnose, and then
click on the Diagnose button to perform the
test.
35
button.
Advertisement
Table of Contents
