Attach Hard Surface Floor/Carpet Pad - Monster CLASSIC FLOOR STEAMER (EZ1) User Manual

C. Attach Hard Surface Floor or Carpet Pad to Steamer
Affix either the Hard Surface Floor Pad or Carpet Glide with
Carpet Pad to your Floor Steamer.
WARNING: To prevent floor damage, ALWAYS attach either the
HARD SURFACE FLOOR PAD or the CARPET GLIDE ACCESSORY with
CARPET PAD when using your Floor Steamer. NEVER use without
either of these attachments affixed to the machine.
ATTACHING HARD SURFACE FLOOR PAD
Place Floor Pad face down on the floor, with
white hook and loop strips facing up. Hold Floor
Steamer about 2" above Pad and gently place
Floor Steamer onto the Pad. Firmly press down
to ensure Pad is securely adhered to the Floor
Steamer.
ATTACHING CARPET GLIDE WITH CARPET PAD
Place Carpet Glide face up on floor. Center
and place Carpet Pad on top of Carpet
Glide. Hold Floor Steamer over Carpet Glide and
gently lower the Steamer onto the Glide. Make
sure the 4 clips on Glide are around the outside
of the Steamer Base and using hands, attach the
4 clips of the Carpet Glide to the Steamer Base.
USE ON HARDWOOD FLOORS
For hardwood floors, use only on "sealed"
hardwood surfaces. Move Steamer forward and
backward while cleaning, carefully observing
the amount of steam used, as too much water
could cause damage.
IMPORTANT NOTE ABOUT LINOLEUM FLOORING
Steam can cause wax to be stripped from, and consequently damage,
some varieties of linoleum flooring. ALWAYS test a small, inconspicuous
portion of the floor BEFORE using steam to ensure that your linoleum
floor does not have this issue.
NOTE: See "Maintenance & Cleaning" (page 13) for care and cleaning instructions
for Microfiber Pads.
7
Before Use