Assemble Handle - Monster CLASSIC FLOOR STEAMER (EZ1) User Manual

1
Assembly of Parts & Preparation of Steamer
Make sure all parts are in the box (see pg 4).
IMPORTANT: FOLLOW THESE INSTRUCTIONS CAREFULLY!
A. Assemble Handle
After removing Handle Assembly from carton:
• Pull Extension Tube apart (shown below).
Pull apart Extension Tube
• Extend Tube to the
"Lock - I" position.
• Snap connector down. When a "click" is heard, the Tube is locked in position.
"Maximum Extension" Position
*IMPORTANT*
Frontal steam can only be generated when Extension Tube is in the
"Maximum Extension" position. BE SURE EXTENSION TUBE IS FULLY
EXTENDED AND LOCKED IN PLACE FOR OPTIMAL STEAM OPERATION.

 
5
Before Use