Monster CLASSIC FLOOR STEAMER (EZ1) User Manual page 6

B. Attach Handle to Steamer
• Before starting, remove the self-tapping screw from the bottom of
Extension Tube.
• Insert the Handle Assembly into the Floor Steamer Base. Align
Arrow on Handle with Arrow on Base (as shown in Fig. A).
• Once inserted, twist Handle Assembly 90° clockwise (as shown
in Fig. B). Be sure Arrow on the Handle is aligned with Line/Lock Icon
on Base.
Fig. C
6
Before Use
Fig. A
Front View
• Align the Handle Assembly
Fig. B
90°
Side View
screw hole with the opening
in the steamer housing.
Secure the handle assembly
with self-tapping screw which
was removed from bottom of
Extension Tube (as shown in
Fig. C).