Safety Instructions - Haier HW-F1481 ME User Manual

SAFETY INSTRUCTIONS

BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
DO ...
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when unplugging the power supply.
... Make sure that the fuses in the power circuit are rated for 15A.
... Keep away from heat sources and direct sun light to prevent plastic and rubber
components from aging.
... Make sure that the power cord is not caught under or in the appliance and
avoid damage to the power cable.
... Check that hose joints and connections are fi rm and no water can leak. If joints
are loose or there is leakage, turn off the water supply and repair. Do not use the washing
machine until the hoses are properly fi xed.
DURING DAILY USE OF THE APPLIANCE
DO ...
... Pull up zips and fi x loose threads to prevent the items from being entangled. If
necessary, put small items into a net bag or pillow.
... Turn off the machine after each wash program and switch it off at the mains to
save electricity and for safety. Wipe clean the lower part of the porthole.
... Keep the door slightly open when the washing machine is not in use to prevent
formation of odours.
... Let the power cord be replaced by the manufacturer, his service agent or other
accordingly qualifi ed persons, in case it is damaged.
... Ensure that the appliance is not used by persons with reduced physical, sensory
or mental capabilities, lack of experience and knowledge without supervision or instruction
by a person responsible for their safety.
... Supervise children to ensure that they do not play with the appliance.
BEFORE USE
DO NOT ...
... Touch or use the appliance when barefoot or with wet or damp hands or feet.
... Use fl ammable detergent or dry cleaning agent.
... Use any fl ammable sprays in close vicinity to the appliance.
... Remove or insert the plug in the presence of fl ammable gas.
... Allow children or infi rm persons to play with the appliance or packing materials.
... Install the appliance outdoors in a damp place, or in an area which may be prone
to water leaks such as under or near a sink unit. In the event of a water leak allow the
machine to dry naturally.
... Place the washing machine directly on a carpet, or close to a wall or furniture.
DO NOT ...
... Touch the washer door during the washing process - it gets hot!
...Place heavy objects or sources of heat or damp on top of the appliance.
... Hot wash foam rubber or sponge-like materials.
... Open the detergent distribution drawer during the wash cycle.
... Force the washer door open. The door is fi tted with a self-lock device and will
open shortly after the washing procedure is ended.
... Open the washer door if the water level is visibly over the porthole.
... Cover the washing machine with plastic cover so that inside dampness cannot
be kept in.
05