Tv Connections Overview - Zenith H27H49S Installation Manual

TV Connections Overview

A brief overview of the connections available on this TV
Use this page for reference when connecting analog or digital signal sources and other source equipment.
To hook up source equipment, refer to the next page; shows pages to go to for equipment hookup options.
Also, see the front connection panel hookup options on page 24.
Notes:
• Digital cable program signal processing is not possible with this TV.
• If only one wire provides the signal source, use a standard 2-way signal splitter and connect it to both
the Antenna-Cable and Digital Antenna RF jacks on the TV, see below.
REAR COMPUTER SVGA
Rear Computer input port. Connect your
PC to this port to show computer video
output on the TV screen.
See page 9.
DI GI TA L
C AN TE NN A
O
M
P
U
T
E
R
I
N
M.P.I.
AN TE NN A
CA BL E
L
R
AUDIO OUT
IN
R
L
R
L
480I
Y
R
P
B
AUDIO
L
P
R
Digital Antenna
Connect if digital signal source
is available.
Note: If both digital and analog
signals are only available from
one RF lead, connect a signal
splitter (not provided).
See page 16.
Antenna/Cable
Connect analog off air antenna
or analog CATV signal source
here. See page 16.
Computer Audio
Connect audio output from your
computer here. See page 8.
Audio Out
Connect to external amplifier.
See page 23.
DVD In
Component Video Inputs
Connect component video
equipment or a DVD player here.
• DVD Player 480i
• Set Top Box 480i
See page 21.
Video In R-Audio-L
Connect composite Video-Audio
source here.
See page 22.
S-Video In R-Audio-L
Connect S-Video-Audio source
here. See page 20.
Note: Key in 132, press Enter to
switch to S-Video source.
MPI Port
Connect LT2002 Quickset II
clone programmer to MPI port.
See page 56.
Page 15