JVC VM-4200 Instructions Manual page 14

Connections
AV connections
VCR 1
(used as the playback source)
AUDIO
L/MONO
When connecting another PC to the COMPONENT/RGB B terminals, set the "RGB/COMPO." setting to "RGB"
(see page 22).
Personal computer
(used as the playback
source)
Notes:
• You can connect another VCR or Monitor to the VIDEO A OUT terminal. However, when connecting a VCR to the
VIDEO A terminals, do not connect both IN and OUT terminals to the same VCR.
• When connecting a VCR to the VIDEO B terminals, you can use either the video or S-video terminals. If the both
terminals are used, S-video terminal will have priority.
12
(Continued)
The terminals on this page are optional. To input video, S-video, and component signals,
you need to install video input unit (IF-C42P1G), which is separately purchased.
(used as the playback source)
VIDEO AUDIO
L/MONO
R
R
IN OUT
VIDEO A
To audio output
To G output
To B output
To R output
To HD/Cs output
To VD output
VCR 2
VIDEO AUDIO
L/MONO
R
IN Y/C IN
VIDEO B
DVD player, etc.
(used as the playback source)
VIDEO
Y/G Pb/B Pr/R HD/Cs
COMPONENT/RGB B
VD