Energy Saving Switch; Presence Sensor - Sony Bravia KDL-52VE5 Operating Instructions Manual

•
I
Presence Sensor
Sensor Range and Detection Angle
Typical coverage
Horizontal Vertical
The
Presence Sensor
is capable of
detecting vertical and horizontal movements. It
may not detect forward/backward movements
to/from the TV set. Large movements are
easier to detect, even of someone in a relatively
far distance.
The sensitivity of the sensor can vary
substantially depending on ambient light and
temperature in the room.
*The given sensor range and detection angle
are measured under typical room conditions.
.i
1
!
Navigating Music Control Panel
Use +1+1+1+ from the remote control to
navigate music during play.
p
• The
TOOLS
Menu selections may vary.
Energy Saving Switch
Turning off the
Energy Saving
Switch
can save
stand by power
consumption.
It has the same
effect as
disconnecting TV's
power AC cord from the wall outlet.
To turn on the TV again, make sure the
Energy Saving Switch
is on (.) position,
then press
POWER
button on the TV set or on
the remote control.
• If Energy Saving Switch is turned
off, the
Timer
settings and the
Current Time
will be cleared.
• If Energy Saving Switch is turned
off, the TV power button or remote
control power button can not work and
the TV will not be turned on.
• To make the TV be standby condition, keep
the Energy Saving Switch on (.)
position, you will be able to use TV or
remote power button to tum on the TV.
Presence Sensor
Presence Sensor
effectively reduces power
consumption by automatically turning off the
picture when no one is present in the vicinity
of the TV set (see online Reference Book for
more details about this feature).
• The sensor is active while watching
broadcast programs, DVD movies,
video games and tapes. It is not active
during functional views such as
displaying menus and the TV guide.
• Do not put anything near the sensor or
the nearby general area (shown above),
as its function may be affected.
• The sensor may respond to heat from
small animals and heating devices, as it
picks up body heat.
• The sensor may trigger picture off
when the viewer stays still for the given
amount of time.
• Do not scratch or apply excessive force
to the sensor surface, as it may damage
the sensor and its function may be
affected.
19