Power Management Setup - Protech Systems PMB-732LF User Manual

4-7. POWER MANAGEMENT SETUP

Choose〝POWER MANAGEMENT SETUP〞option on the main menu, a
display will be shown on screen as below :
ACPI Function
ACPI Suspend Type
Soft-Off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
The "Power Management Setup" allows the user to configure the system to
the most effectively save energy while operating in a manner consistent with
your own style of computer use.
ACPI FUNCTION:
Users are allowed to enable or disable the Advanced Configuration and
Power Management (ACPI).
ACPI SUSPEND TYPE:
S1 (Power On Suspend)
SOFT-OFF BY PWR-BTTN:
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has "hung". The choices are
Delay 4 Sec and Instant-Off.
WAKE-UP BY PCI CARD:
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from the soft-off state.
POWER ON BY RING:
This category enables or disables the powering up of the system when the
modem receives a call while the computer is in Soft-Off state.
PMB-732LF USER
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
F6: Fail-Safe Defaults
Power Management Setup Screen
'
S MANUAL
Chapter 4 Award BIOS Setup
[Enabled]
[S1(POS)]
[Instant-Off]
[Enabled]
[Enabled]
F7:Optimized Defaults
Item Help
Menu Level ►
Page: 4-19