Chapter 2 Hardware Configuration
2-19. CLEAR CMOS DATA SELECTION
JP13 : Clear CMOS Data Selection
The selections are as follows :
FUNCTION
Normal
Clear CMOS
*** Manufacturing Default -- Normal.
Note: To clear CMOS data, user must power-off the computer and set the jumper
to "Clear CMOS" as illustrated above. After five to six seconds, set the
jumper back to "Normal" and power-on the computer.
2-20. CPU FAN CONNECTOR
CPU_FAN1 : CPU Fan connector
The pin assignment is as follows:
PIN
1
2
3
Page: 2-18
JUMPER SETTING
(pin closed)
ASSIGNMENT
GND
VCC12
LPC1_FANIO1
Open
Close
PMB-732LF USER
JUMPER
ILLUSTRATION
S MANUAL