Alcad RT-009 DTT REC User Manual page 32

Note: The default is OFF, set this option to ON
only if this STB is connected to an
OFF
active antenna which amplifies the received RF signal, otherwise please set it to
2.2.1.2 Country Setting
Set the country for Auto Scan, Manual Scan and Time Zone.
Note: Change the Country Setting will automatically change the default Time Zone and
set the default Frequency and Bandwidth for Auto Scan.
2.2.1.3 OSD Language
Set the On Screen Display Language.
2.2.1.4 Audio Language
Set the audio language for watching program.
2.2.1.5 Subtitle Language
Set the language for displaying subtitle.
2.2.1.6 LCN
Set the Logical Channel Number to on or off.
Note: LCN is a number that uniquely identifies a logical channel, which is popular in
some european countries such as England, France.
2.2.1.7 Auto Time Zone / Time Zone
Allow you to enable or disable auto time zone offset update.
If you know the GMT(Greenwich Mean Time) time zone offset of your location, set the
Auto Time Zone to OFF and select an appropriate Time Zone, otherwise set it to ON
and let the system update the time zone automatically according to the transport
stream.
Note: Some Countries are covered with more than one Time Zone.
2.2.1.8 Auto Scan
Press <RED> button to start Auto Scan. See section 1.2.1 for details.
2.2.1.9 Manual Scan
Press <GREEN> button to start Manual Scan. See section 1.2.2 for details.
2.2.2 TV Setup
Setup the display mode for TV. See Figure 3.
Figure 3. TV Setup Figure 4. Video Enhancement
7