Table of Contents
Advertisement
Off Timer menu
■ Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time period has elapsed.
Press the MENU button to select main menu.
Press the e or d buttons to select Off timer. Press the OK button
to enter menu (Setting / Off timer).
Select your desired time by pressing the 7 or 8 button.
Timer
Off Timer
Alarm Timer
: Select
Channel
Date & time
1 (not set) --/--/-- --:-- --:-- (not set)
The time changes in 5 minute steps. The maximum time is 2:00hrs.
2 (not set) --/--/-- --:-- --:-- (not set)
3 (not set) --/--/-- --:-- --:-- (not set)
When Off timer has been set the time will show briefly on the screen
4 (not set) --/--/-- --:-- --:-- (not set)
with the remaining time.
5 (not set) --/--/-- --:-- --:-- (not set)
6 (not set) --/--/-- --:-- --:-- (not set)
7 (not set) --/--/-- --:-- --:-- (not set)
Press MENU button or RETURN button repeatedly to return to
8 (not set) --/--/-- --:-- --:-- (not set)
normal TV picture.
9 (not set) --/--/-- --:-- --:-- (not set)
10 (not set) --/--/-- --:-- --:-- (not set)
11 (not set) --/--/-- --:-- --:-- (not set)
✐ If the TV set is switched off by the Mains Switch 4 and by using
12 (not set) --/--/-- --:-- --:-- (not set)
the Power button on the remote control, or during Autosort, the
OK
Edit/Add event
timer settings will be cancelled.
■ Alarm timer
1. Press the MENU button. Select Off timer using the e or d button
press the 8 button to enter and select timer.
Channel
Wake-up day
wake-up time
Timer
Finish time
Off Timer
Repeat
Alarm Timer
OK Save
: Select
2. Select Alarm-Timer using the e or d button.
3. Press the 7 or 8 button to change time.
The time changes in 1 minute steps.The maximum time is 180 mins.
To cancel the alarm, press any button and the display will disappear.
✐ If the TV set is switched off by the standby button 4 on the
remote control or by the standby switch 4 on the top of the TV
set the timer settings will be cancelled.
?
Event #1 is due to start in 4
minutes. Press YELLOW to switch
now. GREEN to switch on time.
RED to delete the event .BLUE to cancel.
R
Delete
G
12
DIGIT
DIGIT
5~ 120
OFF
: Adjust
: EXIT
MENU
Current events
End
R
Delete
RET
Cancel
Set event
BBC ONE
17/07/03
10:52
11:28
OFF
No repeat
1 ~180
RET Cancel
: Adjust
: EXIT
MENU
Due
Y
Now
B
Cancel
AL
OPERA
TION
AL
OPERA
TION
● Scan for channels
1. Press the Menu button to select Main Menu.
2. Select Installation by using the e or d buttons. Press the OK
button to enter.
Main Menu
Main Menu
i
Main Menu
1. Select Manual or Auto scan by using the e or d buttons. Press
OK button to enter.
2. Using the e or d buttons, this screen will allow you quickly to
tune into any Channel multiplex emitted by the Transmitters in
your area.
MANUAL SCAN
Band width (MHz)
Band width (MHz)
Channel number
Channel number
Frequency (kHz)
Frequency (kHz)
Signal strength
Signal strength
Navigate
3. Press the OK button to scan.
✐ Only those channels showing appreciable signal strength are suit-
able for viewing.
1. If Auto Scan is chosen, when completed, all channels are saved
automatically.
SCAN FOR CHANNELS
Channel(s) found:
This scan will take approximately 3 minutes.
In progress...
✐ Parental lock is still saved after the scan for channels has been
initialised.
Installation
Installation
Installation
Manual Scan
Auto Scan
Manual Scan
8
8
CH-21
CH-21
474000
474000
OK
Scan
RETURN
Cancel
Auto Scan
0
RETURN
Stop
Advertisement
Table of Contents
