Table of Contents
Advertisement
Step : 3 Switching on / Plug & Play
The LCD TV will have a red Standby light to
show there is power.
The following screen will appear before Plug and Play will start.
Autostore
Country
Start
: Select
Using your remote control, press the e or d button to highlight the
Country option. Select UK using the 7 or 8 button. Press the e or
d button to highlight the Start option and press the 8 button to
begin the self-automatic
tuning system called Plug and Play.
The TV scans the analogue channels first and then switches to digi-
tal channel mode and scans digital channels. This could take up to
15 minutes. During automatic tuning, the TV displays the tuning sta-
tus of analogue and digital channel tuning on the screen.
Thank you for purchasing your SANYO TV.
Now I am searching and storing all
programmes.
Please wait.
Scan for channels
Channels found
The scan will take approximately 3 minutes
In progress
RET Stop
Now the installation is complete!
After Plug & Play, Digital channels are stored in the programme
positions shown in the All channel table.
Analogue channels will be automatically sorted as follows:
Programme position 1 : BBC1
Programme position 2 : BBC2
Programme position 3 : ITV
Programme position 4 : CH4 or S4C
Programme position 5 : CH5
Programme position 6 : ITV2
Programme position 7 : channels in order found.
✐
If any other channels are available in your reception area, the
remaining channels will be stored from programme position 7 in
sequence as found.
✐
If you move to another city or cable is installed, please follow the
description "Channel List - scan for channels". (on page 13) or
"Preset Menu" (on page 17/18) for Analogue channels.
✐
This procedure only appears the first time you switch on.
6
INST
INST
-
+
Stop
Stop
P
Time out
Time out
UK
: Adjust
: Exit
MENU
35
ALLA
TION
ALLA
TION
1a. Control Buttons on TV
Time out
Time out
Press the 5 or 6 button to increase or decrease the programme
position.
Press the 1 or 2 button to increase or decrease the sound
volume.
Press the Time out button to freeze the picture and start recording
current live program
Press the stop button to cancel the time out function or stop playing
a disc.
1b.
The Power light and HDD light are shown here. The Power light
displays Red and the HDD light displays Orange when Time out or
Replay are active,. The HDD light displays Red when Recording and
Green when Replaying.
2. Left side terminals
✐
To select the AV4 mode press the v button repeatedly.
✐
When the headphones are inserted the sound from the TV
speakers is muted.
PC Connection
This TV set has a PC connector.You
can connect a PC to the LCD TV and
use it as a monitor if required.
This connection is located on the side
terminal above the AV4 Video and Audio
sockets
3.5 mm Mini Headphone din
AV4 Video in
AV4 Left Audio in
L/S
AV4 Right Audio in
R/D
Terminals
1
b
Standby switch
-
+
P
Stop
Stop
PC input
PC
I
IN
AV4
Advertisement
Table of Contents
