Related Manuals for CPS CP330
Summary of Contents for CPS CP330
-
Page 3: Program Installation
PROGRAM INSTALLATION After CP/U Series PC Program1.00.EXE is acted, install with the basic value on screen. This Program can be used in Windows2000 version or in higher version than Windows2000, and don’t use this program in Windows98 version or in lower version than Windows98. In case of installing the Program in the Windows98 version, a new format on PC may be required. - Page 4 PROGRAM INSTALLATION • New : Erase the stored data and return to the initial stage. • Open File : Read the data of group and channel, etc stored in *. xpfre file. • Save File : Store the data in *. xpfre file. •...
- Page 5 PROGRAM INSTALLATION • 5Tone : Set up the ID and the others related with 5Tone. • 2Tone : Set up the ID and the others related with 2Tone. • Configuration : Set up the contents related with the operation of Radio. •...
- Page 6 PROGRAM INSTALLATION • Model : Select a Model, CP-330V, CP-330U and CP-330P. The frequency range is 136~174MHz for CP-330V, 405~470MHz for CP-330U and 350~390MHz for CP-330P. • Tuning : End-Users can not use this Tune Mode and this is for manufacturer &...
- Page 7 PROGRAM INSTALLATION 8.3 Auto Frequency This screen is for the convenience of user and the user can use this screen in convenience when he want to input in a regular frequency spacing after group setting. • Group : Designate the group to make frequency input. •...
- Page 8 PROGRAM INSTALLATION • It is possible to input the 5Tone IDs up to max. 30 numbers. • It is possible to input ID in 2~7 digits. • It is possible to use the ID of ‘A’ which has the meaning of all. Among the 30 IDs in My Radio ID, you can choose the ID number you want to use and please make sure to designate your own ID to operate the 5 Tone with no problem.
- Page 9 PROGRAM INSTALLATION Response is the function for setting of the response signal when receiving 5Tone CALL from your party, and after selection from the various IDs, you can make a response. Option is the function for setting of transmitting the designated RADIO ID(your ID) when pressing the PTT button at the general RX mode.
- Page 10 PROGRAM INSTALLATION STUN function is used when using STUN / UNSTUN ID. STUN / UNSTUN ID is made in 2~7 digits. After setting of the above menu, select CALL mode. Then, it is possible to make a personal call and a group call by using 5TONE and each CALL memory has the CALL IDs up to 30 numbers.
- Page 11 PROGRAM INSTALLATION Figure11-3) Set-up of your party’s ID 54321 2) You can call the party(ID : 54321) by pressing the “P” button and the Radio(ID : 54321) which received the call signal is operated by 2 methods as follows. If the TX Radio is set up with (Repeater) + Destination + RADIO ID, the RX Radio shows the party’s ID(12345) on the LCD.
- Page 12 PROGRAM INSTALLATION (Figure 8-5) Group Call of Radio (after receiving a call) 8.4.3 RESET If you want to finish the call after completing the call mode, please use the following methods. 1) At the Call mode, press and depress the Monitor button(M). (The call signal will be transmitted to the party’s Radio with the “C”...
- Page 13 PROGRAM INSTALLATION 8. 5. 2Tone The 2 Tone consists of Super Group Tone/ Group Tone / Individual Group Tone. • Each Group Tone consists of Tone1 and Tone2. • Tone2 can do Enable/ Disable. • Frequency input is between 280~3000Hz. •...
- Page 14 PROGRAM INSTALLATION 8.6 Configuration 8.6.1 DTMF If end-user presses the PTT switch, the TX is started and at that time, introduce the setting method of DTMF ANI. • DTMF ANI Enable : When starting the TX of DTMF ID, decide yes or no of transmission. Make input of DTMF ID.
- Page 15 PROGRAM INSTALLATION 8.6.2 Group This Radio is designed to use 16 Groups and 512 Channels. It means that one Group can use up to max.512 Channels and if the 512 Channels are divided by 16 Groups, each Group can use 32 Channels.
- Page 16 PROGRAM INSTALLATION 8.6.3 Priority CH The above window is for setting the Priority Scan Channel of each Group. Only the Group with the allocated channel is activated and editable, and when channel setting, only the channel which is set up as scan channel can be Priority Scan Channel.
- Page 17 PROGRAM INSTALLATION 8.6.4 SCAN The above window is related to the setting of Scan operation. The Scan List of Scan Channel is registered by setting the SCAN to “Yes” at the frequency input window. • Priority Scan Enable : Decide whether to use the Priority Channel scanning method or not when operating scanning.
- Page 18 PROGRAM INSTALLATION • Sub TONE : The matching of both frequency and sub-audio makes it possible to receive after the stop of scanning. • Attack Time(Carrier) : It is the time for checking whether a suitable carrier exists or not. •...
- Page 19 PROGRAM INSTALLATION 8.6.5 EMER(Emergency) This is related to the setting of Emergency Call. • Call Select : Tranmit an emergency call signal to the party by using 5Tone. • Sound Select : Generate emergency call sound through the speaker in the Radio. •...
- Page 20 PROGRAM INSTALLATION 8.6.6 TOT (Time Out Time) This is related to TOT(Time Out Time) for prevention against one user’s continuous transmission. If a Radio exceeds the TOT time, Tx Penalty Time will be applied and the transmission will be automatically stopped. •...
- Page 21 PROGRAM INSTALLATION 8.6.7 PSC (Power Save Control) This is the setting method for reduction of battery consumption current in order to use the battery of Radio for longer period. • Enable : Decide whether the PSC will be used or not. •...
- Page 22 PROGRAM INSTALLATION .6.8 BCLO (Busy Channel Lock Override) Not to interrupt other users using the same frequency, the user can change the BCL (Busy Channel Lock)/BCLO(Busy Channel Lock Override) which limit transmission. Carrier Receive CH-set Tone Match BCLO No Tone ×...
- Page 23 PROGRAM INSTALLATION 8.6.9 VOX (Voice Operation Transmit) This is related to VOX which recognizes and transmits the audio signal inputted through microphone. • Enable : Decide whether the VOX will be used or not. • VOX Sensitivity : Decide the sensitivity of VOX transmission on input signal. •...
- Page 24 PROGRAM INSTALLATION 8 .6.10 Default The user can change the selected data of each Flag related to the Radio operation. • Key Lock : Decide whether the Key operation needs to be prohibited or not. • Key Alert : Decide whether the Key alert is needed or not. •...
- Page 25 PROGRAM INSTALLATION 8 .6.11 Lone Worker If not pressing the designated button within a period of time(Lone Worker Response Time) when night patrol or guarding, the Radio recognizes as an emergency situation and makes the emergency call automatically. • Lone Worker Enable : Decide the Enable or the Disable of this function. •...
- Page 26 PROGRAM INSTALLATION 6.12 Repeater This is the function for using the Radio as a Repeater. The Enabled Repeater activates the Repeater function at the Menu of Radio.
- Page 27 PROGRAM INSTALLATION .7 STUN Delete If making deletion of the STUN designated in the Radio without moving to a separate screen, the Radio is converted to the normal mode. Tune Mode Tune mode is for adjustment of Radio performance and it adjusts the TX output power, the Audio modulation, the Sub-tone modulation and the BPF of RX Front-end, etc.
- Page 28 PROGRAM INSTALLATION • Read : Read the data saved in Radio. • Write : Write the data displayed on the window to the Radio. • Read File : Read the data saved in the *. xptun file. • Write File : Save the data in the *. xptun file. •...
- Page 29 PROGRAM INSTALLATION 8. 1 Tuning Process 1) First, read the Tuning data saved in Radio. Press the ‘TX START’ button for tuning of TX performance and press the ‘RX START’ button for tuning of RX performance. Move to the next step by using the mouse or the ‘SPACE’ key. After the above, make sure to press the ‘ENTER’...
- Page 30 PROGRAM INSTALLATION 8.9 Radio Management Window The above window shows the information and records for management of each Radio. It is possible to save the information for total 4 kinds of year/month/date. • Radio Write : This function is for saving only the contents on this window separately to the Radio.
Need help?
Do you have a question about the CP330 and is the answer not in the manual?
Questions and answers