1. Manuals
  2. Brands
  3. CPS Manuals
  4. Transceiver
  5. CP-390
  6. User manual

CPS CP-390 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
UHF Transceiver
CP-390

Advertisement

Table of Contents
loading

Related Manuals for CPS CP-390

Summary of Contents for CPS CP-390

  • Page 1 User Manual UHF Transceiver CP-390...
  • Page 2 1. CP390 Series Main Features The CP390 Digital Radio was developed to be user-friendly and compact design, to have various features and to use at the construction / industrial / commercial / public areas for the safety & convenience of users. It provides better communication distance, audio quality and volume, duration of use through digitalization than Analog radio.

  • Page 3: Specification

    2. Specification 2.1 CP390 General Frequency Range 400 ~ 470 MHz Frequency Stability ±1ppm (-30 to +60℃) Programmable Channels 16 Zones / 32 Channels Channel Spacing 12.5KHz Digital Vocoder AMBE++ Dimensions 99mm(H) x 51mm(W) x 21mm(D) Weight 250g Power Source DC +7.5V Li-ion 2,600mAH Battery Current Drain (maximum) Receive mode, rated audio out –...

  • Page 4: Checking Items In The Package

    3. Checking items in the package Components could be changed by buyer request. Radio unit Battery 1 slot charger Antenna Belt clip Hand strap(option) User manual Figure 3-1) CP390 series main items 3.1 Appearance of CP390 Series Radio...
  • Page 5 Figure 3-2) Appearance of CP390 Series Radio...

  • Page 6: Basic Button Operations

    If you press the button shortly, it will operate with the function set by Emergency the CPS program, and the default value is set to Emergency. . Press Flash Lamp Button the button long, it is to activate the flash lamp on / off button.

  • Page 7: Basic Operation

    4. Basic operation Please fully read the instruction manual before use. This manual provides important information related to radio operation. 4.1 Installation and Removing the Antenna To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise. To remove the antenna, screw the antenna counter clockwise.

  • Page 8: Accessory Connector

    Figure 4-2) Installation and Removing the Battery 4.3 Installation and Removing the Belt Clip - To attach belt clip to radio, align belt clip rails with the grooves in radio and slide the belt clip onto the mounting rails until it latches into place. - To remove belt clip from radio, push up on tab of belt clip with flat bladed screw driver and at the same time, slide the belt clip towards the top of Radio figure4-3).

  • Page 9: Radio Operation

    Figure 4-4) Accessory connector 5. Radio operation The definition of the various buttons of the XP-400D series is the same as Figure 5-1). Figure 5-1) CP390 Series button definition...

  • Page 10: Ptt Button

    5.1 Power ON/OFF, Volume Switch Turning the volume switch knob clockwise to power on and turning the knob counterclockwise to power off. And when set an audio volume level, please refer with the index on the side of the volume knob. 5.2 PTT Button Pressing PTT button, the radio mode is transmission and releasing the button, it is receiving mode.

  • Page 11: Charging The Battery

    5.5 CH/Menu UP/Down Button " CH / MENU UP" and "CH / MENU Down" are to change channels and in the menu entry mode, it is select the UP / Down of the Menu. 5.6 EAR/MIC Jack Accessory connector is used to connect external speaker Mic, and headset, etc. Please close the cover when nothing is connected.

  • Page 12: How To Charge

    Figure 6-1) Battery charging 6.3 How to charge 1) Plug the adapter of the CS390 charger in general power AC220V power outlet. 2) When charging the battery that is equipped with radio, please turn off the power of the Radio and plug the Radio in the charger. 3) Even if charging is completed (green lamp lights), please charge more for about 30 minutes for a full charge.

  • Page 13: Menu Description

    7.1.1 Contact List Set a contact list (set to CPS program) and will be pressing the PTT button to call. If you want to call with another registered contact, after you select a contact from the contact list and press the PTT button, it will be the call.
  • Page 14 Message menu has a simple message, inbox, outbox, three kinds of menu. Simple Message Using the CPS program can create a total of 10 messages and One message can be edit up to 40 characters. If you select a simple message menu you can view the registered message.
  • Page 15 If there is a channel used during the scan, you will receive the contents stops at that channel. If you want to call, you can use the settings to suit your needs by the CPS program. 1) Scan ON/OFF Select the scan settings or scan release at the scan of menu and go to receive mode..

  • Page 16: Button Lock

    9. LCD Brightness The function is to adjust the brightness. The brightness can be set from 1 to 7 step. LED Control The feature is to set the LED status display. It can be set detailed using the CPS program.
  • Page 17 11. Language The feature is to select the language for the menus. 12. Screen Screen consists of ① Screen1 ② Screen2. 13. Power Save Power save consists of 4 steps: ① OFF ② 1: 1 ③ 1: 2 ④ 1: 4. 7.1.8 Radio Information A menu that shows the information in this device..

  • Page 18: Safety Notes

    • If the Radio is placed for a long time in car in summer, the hot temperature in the car may cause an explosion of battery. • Don’t make a damage to the battery by a sharp substance and/or an excessive shock.
  • Page 19 • Please keep the Radio away at least 1inch from the body. • If the outside surface of antenna gets stripped out, it can make a burn on the skin. • If you contact a conductive metal to battery terminal, a heat can be made and it may cause fire, explosion and burn.

Table of Contents