Assembling Your Pouring Shield; Using Your Kitchenaid; Tm Accessories - KitchenAid 5KSM150PS Manual To Expert Results

Assembling Your Pouring Shield*

To Attach Pouring Shield
1. Turn speed control to "O."
2. Unplug stand mixer or disconnect power.
3. Attach flat beater, dough hook, or wire
whip and bowl. See "Assembling Your
Tilt-Head stand mixer" section.
4. From the front of the mixer, slide the
pouring shield over the bowl until the
shield is centered. The bottom rim of the
shield should fit within the bowl.

Using Your KitchenAid

Flat Beater for normal to heavy mixtures:
cakes
creamed frostings
candies
cookies
pie pastry
Wire Whip for mixtures that need air incorporated:
eggs
egg whites
heavy cream
boiled frostings
Dough Hook for mixing and kneading yeast doughs:
breads
rolls
pizza dough
Pouring Chute
6
To Remove Pouring Shield
1. Turn speed control to "O."
2. Unplug stand mixer or disconnect power.
3. Lift the front of the pour shield clear of
the bowl rim and pull forward.
4. Remove attachment and bowl.
To Use Pouring Shield
1. For best results, rotate the shield so the
motor head covers the U-shaped gap
in the shield. The pouring chute will be
just to the right of the attachment hub
as you face the mixer.
2. Pour the ingredients into the bowl
through the pouring chute.
*If Pouring Shield is included.
Accessories
TM
biscuits
quick breads
meat loaf
mashed potatoes
sponge cakes
angel food cakes
mayonnaise
some candies
coffee cakes
buns