JVC 0509SKH-SW-MT Instructions Manual page 13

To view 3D images
This monitor supports LINE BY LINE and SIDE BY SIDE 3D signals. To view
3D images, input a compatible 3D signal to enjoy the 3D effects.
You can activate the 3D mode using the following method.
Touch and
simultaneously.
OR
Press the "3D" button on remote control. (P. 6)
SIDE BY SIDE 1 SIDE BY SIDE 2
LINE BY LINE
Input signal
SIDE BY SIDE 1
Left screen Right screen
Input signal
on the touch sensor panel (P. 7)
LINE BY LINE
For line-by-line 3D input and normal
2D input.
Monitor screen
For horizontally compressed side-
by-side 3D input.
Monitor screen
SIDE BY SIDE 2
Left screen Right screen
Input signal
Note
2D to 3D image conversion function is not available.
When using SIDE BY SIDE to view 3D images, screen displays such as
menu screen will appear either on the left or right side of the screen. If you
cannot see the screen clearly, remove your circular polarizing glasses.
Set the 3D/ZOOM mode to the following setting when viewing in 3D.
Input Format
LINE BY LINE,
HDMI 1080p
SIDE BY SIDE 1/2
HDMI,
1080i SIDE BY SIDE 1/2
Component
If double vision occurs when viewing in 3D using the component inputs,
set the following items.
"Sharpness": Minimum (P. 17)
"Clear SD", "Digital VNR", "DigiPure", "MPEG Noise Reduction": "Off"
(P. 18)
For non-compressed side-by-side
3D input
Monitor screen
3D Mode Zoom Mode (P. 14)
Full Native
Full Native
12