Getting Started - JVC 0509SKH-SW-MT Instructions Manual

Getting started

Please read P. 10 of this manual to set up your monitor.
Check accessories
Remote control
Cleaning cloth
(For details on using the
cleaning cloth, see P. 8.)
Circular polarizing glasses
(x2)
(For viewing 3D images)
Stand, stand cover, screws and plates are also included. For details, refer
to page 8.
"AAA/R03" Batteries
(For confirming the
monitor works)
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Install your monitor
Follow the instructions on page 8 to attach the stand provided to the monitor.
Place the monitor on a flat and stable location.
Power requirements
Connect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.
Installation requirements
To prevent the monitor from falling, thread the belt through the hole on the
back of the stand and secure it to the rack, etc.
Belt and screw (not provided)
Insert the batteries
Use two "AAA/R03" dry cell batteries. Insert the batteries from the - end,
making sure the + and - polarities are correct.
Hole
9