Do you have a question about the CIB3-2 and is the answer not in the manual?
Questions and answers
Brent Qualters
January 26, 2025
Why have a rheostat and a rheostat knob if they don't do anything?
1 comments:
Mr. Anderson
February 10, 2025
The rheostat in the Empire Comfort Systems CIB3-2 is used to control the blower speed. The rheostat knob allows the user to adjust the blower's operation by turning it to increase or decrease the fan speed.
Summary of Contents for Empire Comfort Systems CIB3-2
Page 1
INSTALLATION INSTRUCTIONS CAST IRON BLOWER CIB3-2 FOR USE ON: HERITAGE CAST IRON STOVES MODELS: GAS-FIRED DVP30CA30(B,F,M,S,W)(N,P) VFP30CA30(B,F,M,S,W)(N,P) LEAVE THIS MANUAL WITH THE OWNER FOR FUTURE REFERENCE. CAUTION: Sharp edges, use protective gloves when Hardware Package installing. Carton Contents #10 x 1/2” SCREW...
Page 2
OPTIONAL BLOWER INSTALLATION INSTRUCTIONS Installing Optional CIB3 Blower 10. Install rheostat through hole in wire channel and align small Loosen, but do not remove, four (4) hex-head screws located tab with small hole. on the exterior, bottom of the appliance. 11.
Page 3
OPTIONAL BLOWER INSTALLATION INSTRUCTIONS Cleaning CAUTION: Label all wires prior to disconnection when servicing The blower wheel will collect lint and could require cleaning once controls. Wiring errors can cause improper and dangerous a year. If the air output decreases or the noise level increases, it operation.
Page 4
18879 RHEOSTAT 26050 WIRE CHANNEL - LEFT, DV 26052 WIRE CHANNEL - LEFT, VF Empire Comfort Systems Inc. EMPIRE EMPIRE 918 Freeburg Ave. Belleville, IL 62220 If you have a general question about our products, please e-mail us at info@empirecomfort.com.
Need help?
Do you have a question about the CIB3-2 and is the answer not in the manual?
Questions and answers
Why have a rheostat and a rheostat knob if they don't do anything?
The rheostat in the Empire Comfort Systems CIB3-2 is used to control the blower speed. The rheostat knob allows the user to adjust the blower's operation by turning it to increase or decrease the fan speed.
This answer is automatically generated