D-Link dsl-504T User Manual page 41

To manually configure IP settings on
Windows workstations, open the TCP/IP
Properties menu and select the "Use the
following IP address" option. You will need
to supply the IP addres, Subnet mask and
Defualt gateway (use IP address of DSL-
Note
504T) for each workstation. The example
here also uses manually configured DNS
settings.
Static IP on LAN
If the Router has the DHCP server enabled it is possible to permanently assign IP addresses to workstations
specified by their MAC address. Up to five IP addresses may be assigned to five different devices. This will take
the chosen IP address used out of the available addresses in the dynamic IP address pool and give a permanent
lease time for the IP address to the selected device.
To assign an IP address that will not age out, type in the MAC Address of the device and its static IP Address
in the spaces provided. Use the format: 00-00-00-00-00-00 for the MAC address and the standard format:
10.1.1.xxx for the IP address. A Static DHCP Client List will appear below the DHCP Client list with any clients
that have been configured for static IP address assignment.
Page 41 of 96
DSL-504T Generation II ADSL2+ Modem Router
www.dlink.com.au