D-Link dsl-504T User Manual page 24

DSL-504T Generation II ADSL2+ Modem Router
Using the Setup Wizard - Finish and Restart
Finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the
necessary information correctly, click the Restart button to save the new configuration settings and restart the
Router. If you need to change settings from a previous window, click the Back button.
Do not turn the Router off while it is restarting. After the Router is finished restarting, you are now ready
to continue to configure the Router as desired. You may want to test the WAN connection by accessing the
Internet with your browser.
Page 24 of 96 www.dlink.com.au