Front Panel Display - D-Link dsl-504T User Manual

Front Panel Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.
The LED indicators on the front panel include Power, Status, ADSL and Ethernet. The ADSL and Ethernet
indicators monitor link status and activity (Link/Act).
Power
Status
ADSL (Link/Act)
LAN 1-4 (Link/Act)
Page 10 of 96
DSL-504T Generation II ADSL2+ Modem Router
Steady green light indicates the unit is powered on. When the device is powered off this
remains dark.
Lights steady green during power on self-test (POST). Once the connection status has been
settled, the light will blink green. If the indicator lights steady green after the POST, the
system has failed and the device should be rebooted.
Steady green light indicates a valid ADSL connection. This will light after the ADSL
negotiation process has been settled. A blinking green light indicates activity on the WAN
(ADSL) interface.
A solid green light indicates a valid link on startup. This light will blink when there is activity
currently on any Ethernet port.
www.dlink.com.au