Sata Connectors Controlled By Intel Ich6 - Medion MS-7091 User Manual

MS-7091 M-ATX Mainboard
Serial ATA Connectors controlled by Intel ICH6: SATA1~SATA4
The SouthBridge of this mainboard is Intel ICH6 which supports four serial ATA
connectors SATA1~SATA4.
SATA1~SATA4 are dual high-speed Serial ATA interface ports. Each supports
1 st generation serial ATA data rates of 150 MB/s. Both connectors are fully compliant
with Serial ATA 1.0 specifications. Each Serial ATA connector can connect to 1 hard
disk device. Please note that the hard disk with your operating system installed
should be always connected to SATA1 or SATA2.
SATA4 SATA3
1
Serial ATA cable
Connect to serial ATA ports
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, since
this might cause the loss of data during the transmission.
2-16
1
7
7
SATA1
SATA2
SATA1~ SATA4 Pin Definition
PIN SIGNAL PIN
1 GND 2
3 TXN 4
5 RXN 6
7 GND
Take out the dust cover and
connect to the hard disk
devices
SIGNAL
TXP
GND
RXP