Polaris Power P3000iE User Manual page 50

TROUBLESHOOTING
No Power at AC Receptacles
POSSIBLE CAUSE
Output indicator is OFF, and overload indicator is ON
AC circuit protector tripped
Overload protector tripped
Faulty power tool or appliance
Faulty generator
No Power at DC Receptacle
POSSIBLE CAUSE
Is the fuse blown
Faulty generator
46
SOLUTION
Take the generator to a Polaris servicing dealer or refer to
the service manual
Check AC load and reset circuit protector
Push the Overload Restart switch
Replace or repair power tool or appliance; stop and restart
the engine
Take the generator to an authorized Polaris servicing
dealer or refer to the service manual
SOLUTION
Replace the fuse.
Take the generator to an authorized Polaris servicing
dealer or refer to the service manual