Advertisement
Charging the Solar ReStore Battery Pack (cont'd)
USB Charging
The Solar ReStore battery pack can be charged by USB port using the
(c) MiniUSB charging cable. Connect the small end of the (c) MiniUSB charging
cable to the (7) IN port on the side of the Solar ReStore. Connect the other end
of the (c) MiniUSB charging cable into a USB port to begin charging. The (4) Status
LED will glow RED to indicate charging. The 1500mAh internal backup battery will
take about 5 hours to fully charge. The capacity can be checked by pressing the
(8) CHECK button on the (6) Capacity indicator.
Solar Charging
The Solar ReStore battery pack can be charged by using the power of the Sun.
For best results, place the Solar ReStore in direct sunlight. The (4) Status LED will
glow RED to indicate charging. The 1500mAh internal backup battery will take
about 6 hours to charge to 50%. The capacity can be checked by pressing the (8)
CHECK button on the (6) Capacity indicator. Once the Solar ReStore has reached
20% or 50%, you can connect it to your device for backup power. Please note, the
maximum capacity for solar charging is about 50%. It's best to use solar charging
as a means of battery-boosting, as it provides about half of a full charge to the
newest smartphones.
Charging Your Mobile Device
The Solar ReStore is designed with a 1500mAh internal backup battery. Many
mobile devices can charge with the included (c) MiniUSB and (b) MicroUSB charg-
ing cables. Simply choose the charging cable which is appropriate for you, and
connect the small end into your mobile device. Next, connect the other end of
the charging cable into the (2) Universal USB power port on the Solar ReStore. Fi-
nally, slide the (3) Control switch to the ON position to begin charging your device.
You will see the (4) Status LED glow BLUE to indicate power flow to your device.
The (2) Universal USB power port allows you to charge mobile devices such as
iPod®, iPhone®, Zune®, Samsung® phones and other devices which require special
proprietary OEM cables. Simply connect your OEM USB cable to your device and
the Solar ReStore as described in the steps above.
Advertisement
