Advertisement
Product Diagram
1 - Solar panel
2 - Universal USB power port
3 - Control switch
4 - Status LED
6
back
Operating Instructions:
Charging the Solar ReStore Battery Pack
AC Charging
The Solar ReStore battery pack can be charged by any standard AC wall outlet
using the included (d) USB-AC adapter and (c) MiniUSB charging cable. Connect
the small end of the (c) MiniUSB charging cable to the (7) IN port on the side of the
Solar ReStore. Connect the other end of the (c) MiniUSB charging cable into the
(d) USB-AC adapter. Next, plug the (d) USB-AC adapter into any standard AC wall
outlet to begin charging. The (4) Status LED will glow to RED indicate charging.
The 1500mAh internal backup battery will take about 3 hours to fully charge.
The capacity can be checked by pressing the (8) CHECK button on the (6) Capacity
indicator.
1
3
8
5 - Flexible LED light
6 - Capacity indicator
7 - IN port
8 - CHECK button
4
7
2
5
Advertisement
