Table of Contents
Advertisement
Operating Instructions (continued) :
Check the Battery Status
The TwinPort battery pack will glow one of three different colors when in use.
The (2) Status LED lights will glow RED to indicate it has a charge of 0%-20%,
PURPLE to indicate it has a charge of 20%-60%, and BLUE to indicate it has a
charge of 60%-100%. When the battery pack is not in use, the capacity can also
be checked by briefly pressing the (3) Power button on the side of the TwinPort.
The (2) Status LED lights will flash once indicating the status of the battery pack.
Charging Your Mobile Device
The TwinPort battery pack is designed with a high-capacity 5000mAh internal
backup battery and dual port design that allows you to charge two mobile
devices at once. Many mobile devices can charge with the included (c) MiniUSB
charging cable and (d) MicroUSB charging cable. Simply choose the charging cable
which is appropriate for you, and connect the small end into your mobile device.
Next, connect the other end of the charging cable into either or both (2) Dual USB
power ports on the TwinPort battery pack. Press and hold the (3) Power button
and release when you see the (2) Status LED lights turn ON to indicate power flow
to your device.
The (2) Dual USB power ports allow you to charge mobile devices such as iPod,
iPhone, Zune, Samsung phones and other devices which require special pro-
prietary OEM cables. Simply connect your OEM USB cable to your device and
the TwinPort battery pack as described in the steps above. When charging iPad
and other tablets, only one device can be charged at a time due to high power
requirements. When using other USB powered devices such as cell phones, both
ports may be utilized for dual charging.
Advertisement
Table of Contents
