Customer Care Europe, Middel East & Africa Scce Training Group  2003 Nokia Mobile Phones; Chapter 2: Cti Calibration; Confidential Nhm-8; Date 10-03-2003 - Nokia 3510 Repair Manual

Customer Care Europe, Middel East & Africa
SCCE Training Group
 2003 Nokia Mobile Phones

CHAPTER 2: CTI calibration

- This step is necessary to calibrate the AD converter for the cover detection.
Use any active cover for calibration you have available (no service-tool deliverable).
-
Measure the value of CTI resistor of your active cover between "Ground" and "Control" (see picture below).
Enter this value into the calibration window (CTI resistor).
-
Press "calibrate", then press "write".
-
© NMP 2003
Supply
Ground
Control
CONFIDENTIAL
NHM-8 / RH-9

Date 10-03-2003

Checked by: SCCE
7 (18)
Repairhints
Version 2.0 Approved
Approved by: Training Group