Customer Care Europe & Africa Scce Training Group; Additional Information - Nokia NPE-4 Service Manual

Customer Care Europe & Africa
SCCE Training Group

Additional Information

BB shield disassembly instructions
For disassembly it is important to lay the PWB on a plane underground so that the bottom connector is hanging free to prevent
bending of PWB and cracking of the connector´s solderings (See pictures below).
Wrong
Correct
When disassembling the BB shield be very careful because Flash D450 could be damaged (See pictures on next page).
Start by lifting and bending the lid with a tweezer at the marked points 1- 3 (see pictures below).
Do not use too much force on the frame because it could be damaged and the PWB also could be mechanical stressed.
© NMP 2002
CONFIDENTIAL
NPE-4 6310/NPL-1 6310i
Date 15.08.2002
Checked by:
SCCE Training Group
5 (25)
Repairhints
Version 1.0 Approved
Approved by:
SCCE