Sound Adjustment; Setting The Surround Mode; Setting The Clock; Setting The Alarm - LG CM4630 Owner's Manual

Sound adjustment

Setting the surround mode

This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT on the remote control or
LG EQ on the unit.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
On Display
You can enjoy comfortable and
NATURAL
natural sound.
Realizes the sound equalizer that
is the most similar to the genre
AUTO EQ
of which is included in the MP3
ID3 tag of song files.
This program lends an
POP
enthusiastic atmosphere to the
CLASSIC
sound, giving you the feeling
JAZZ
you are at an actual rock pop,
ROCK
jazz or classic concert.
This function is optimized
MP3 -- OPT for compressible MP3 file. It
improves the treble sound.
Reinforces the treble, bass and
BASS
surround sound effect.
Improves the bass and treble
LOUDNESS
sound.
You can enjoy the sound
BYPASS
without equalizer effect.
,
Note
y On some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
y Maybe you need to reset the surround
mode, after switching the input, sometimes
even after the sound track changed.
y By pressing BASS BLAST on the unit you
can directly select the BYPASS or BASS
BLAST sound.
CM4630-FE_DAUSLLK_ENG_7539.indd 21
Description

Setting the Clock

1. Turn the unit on.
2. Press CLOCK.
3. Choose time mode by pressing Y/U.
- AM 12:00 (for an AM and PM display)
or 0:00 (for a 24 hour display)
4. Press SET to confirm your selection.
5. Select the hours by pressing Y/U.
6. Press SET.
7. Select the minutes by pressing Y/U.
8. Press SET.
9. If you want to reset the clock, press and hlod
CLOCK. Then repeat steps 3-8.

Setting the alarm

You can use the unit as an alarm clock.
You have to set the clock before setting the alarm.
1. Turn the unit on.
2. Press TIMER.
3. Each of functions will blink. Press SET to select a
sound source you want.
4. "ON TIME" will be displayed. This is your desired
time to the unit turns on. Press Y/U to
change the hours and minutes and press
SET to save.
5. The "OFF TIME" will be displayed. This is your
desired time to the unit turns off. Press Y/U
to change the hours and minutes and press SET
to save.
6. Press Y/U to change the volume and
press SET to save. The clock icon "(" shows
that the alarm is set.
7. Press TIMER. You can check the setting status.
8. If you want to reset the alarm, press and hlod
TIMER. Then repeat steps 3-6.
Operating 21
3
2013-02-18 11:55:47