Using Several Handsets; Registering Handsets - Gigaset C450 IP Manual

Using several handsets

Using several handsets

Registering handsets

You can register up to six handsets to your
base station.
Please note:
– If there are several handsets registered to
your base station, you can use one to make
a call via the fixed network and the other to
make a call via the Internet at the same
time.
– As a rule, all calls from a registered GAP
handset are dialled via the connection type
(fixed network or VoIP, see page 47) that
has been set up as
If you want to establish a connection via
the other connection type, enter a "*" (star)
after the phone number. Example:
049891234567*.
Registering another Gigaset C45
handset
Before you can use your handset, you
must register it to a base station.
You must initiate handset registration on
the handset and on the base station.
If the handset has been registered suc-
cessfully you will see the display key
the bottom left of the display. Otherwise
repeat the procedure.
On the handset
¢ ¢
Settings
Menu§
Handset
~
Enter the system PIN of the
base station (the default is
0000) and press
play shows e.g.
and
Base
On the base station
÷
Within 60 secs. press and hold
the registration/paging key on
the base station (page 1)
(min. 1 sec.).
40
Default Line Type.
§INT§
¢
Handset Register
. The dis-
§OK§
Registering
is flashing.
The handset is assigned the lowest unas-
signed internal number (1–6). If several
handsets are registered to the base sta-
tion, the internal number is shown in the
display after registration, e.g.
means that the handset has been assigned
the internal number 2.
Please note:
If six handsets are already registered to the
base station, there are two options:
– The handset with the internal number 6 is
in idle status: the handset you wish to reg-
ister is assigned the number 6. The handset
that was previously number 6 is de-regis-
tered.
– The handset with the internal number 6 is
being used: the handset you wish to regis-
ter cannot be registered.
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
÷
at
INT
Press and hold the registra-
tion/paging key on the base
station (page 1) (min. 1 sec.).
2. This