Activating/Deactivating The Automatic Version Check; Activating Voip Status Message; Display - Gigaset C450 IP Manual

Conducting the firmware update
locally
Precondition: A Web server runs on the
local PC (e.g. Apache).
¤
First, load the desired version of the
firmware from the Internet onto a local
PC.
¤
In the
User defined firmware file
enter the IP address of the PC in your
local network and the complete path
and name of the firmware file on the
PC. Example: 192.168.2.105/C450IP/
Firmware_Datei.bin.
¤
Click on Set to save the changes.
This setting is automatically used for the
subsequent firmware update. The Inter-
net server URL stays saved and is re-used
for further firmware updates. If you want
to use a local PC again for another update,
then you have to re-enter the IP address
and file name.
Please note:
If an error arises during a firmware update
from a local PC, the most recent version of the
firmware is automatically downloaded from
the Internet.
Starting the firmware update
Preconditions:
u
No calls are being made via the fixed
network or VoIP.
u
There is no connection between regis-
tered handsets or to GHC devices.
u
The base station menu is not open in
any of the handsets.
¤
Click on
Update Firmware.
The firmware is updated. This process can
take up to 3 minutes.
Please note:
You can also start the firmware update on the
handset (page 47).
Activating/deactivating the
automatic version check
When the version check is activated, the
phone checks on a daily basis whether the
Siemens configuration server is carrying a
new version of the phone firmware or of
the file with the general settings for your
field
VoIP provider.
If a new version is available, a notification
is sent to the handset and the message key
flashes. You can then carry out an auto-
matic update of the firmware (page 47) or
of the VoIP provider settings (page 48).
¤
Open the following Web page:
Settings
¤
Click on the
Automatic check for software/profile
updates
version check.
Click on
check to be carried out.
¤
Click on

Activating VoIP status message

display

Display VoIP status messages on your
handset when there are VoIP connection
problems. These messages give you infor-
mation on the status of a connection and
contain a provider-specific code that helps
the service team when they are analysing
the problem.
¤
Open the following Web page:
¢
¤
Click on the
status on handset
sage display
If you click on No, no VoIP status mes-
sages are displayed.
¤
Click on
¢
Miscellaneous.
option next to
Yes
to activate the automatic
if you do not want a version
No
Set to save the changes.
Miscellaneous.
Yes option after
to activate status mes-
to save the changes.
Set
Web configurator
Settings
Show VoIP
67