Radio Operations; Listening To The Radio - JVC KD-SX995 Instructions Manual

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM 1 FM 2
(F1) (F2)
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
* When "CLOCK" is set to "ON" (see page 27),
the current indication will soon change to the
clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.

RADIO OPERATIONS

FM 3 A M
(F3)
Selected band appears*.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
To search stations of
higher frequencies
To search stations of
lower frequencies
9