Sync Out - Voice Systems Data Filer Operating Manual

You can use this video page to enable the messages it describes, thus:
ü Message=ON: message interpreted.
ü Message=OFF: message ignored.
The messages are:
: selectable using the [F2] function key – enables/disables reception of the MIDI
o
Clock
CLOCK. If this message is not present at the input, the instrument will refer to its own
internal Clock; otherwise, the
to the bpm value of the transmitter instrument.
: [F3] – enables / disables reception of the MIDI START, STOP and PAUSE/
o
Commands
CONTINUE messages.
: [F4] – reception of the SONG SELECT message, allowing selection of the
o
Song S.
number of the active song.
: [F5] – reception of the SONG POSITION POINTER message for remote search for
o
Spp
the bars of the selected song.

8.3.6 SYNC OUT

By a procedure similar to the SYNC IN function, the SYNC OUT function allows you to enable
the transmission of given synchronisation messages.
Pay special attention to the status of the output filters (OUT FILTER) for the Real Time
messages. Enabling the filter will prevent transmission of any synchronisation messages.
From the MIDI menu select the
show the video page:
You can use the function keys and the encoder to enable (ON status) or disable (OFF status)
transmission of the following messages:
: selectable using the [F2] function key – enables/disables transmission of the
o
Clock
MIDI CLOCK.
: [F3] – transmission of the START, STOP and PAUSE/CONTINUE messages.
o
Commands
: [F4] – transmission of the SONG SELECT message.
o
Song S.
: [F5] – transmission of the SONG POSITION POINTER message.
o
Spp
After making the desired settings, press the [ESC] key and the modifications made will be
saved automatically.
DA T A FILER
field of the MAIN PAGE will be automatically updated
Tempo
field using the [F6] function key; the display will
SYNC OUT
150