Loading Data From Memory Card - Furuno GP-1640F Operator's Manual

10.3 Loading Data from
Memory Card
Data (track, marks, waypoints, configuration)
can be loaded from a memory card and
displayed on the screen. This feature is useful
for observing past data and setting up the
equipment for a specific purpose (with
"configuration").
1. Press the [MENU] key followed by the
CONFIGURATION and
UPLOAD/DOWNLOAD DATA soft keys.
2. Press the LOAD DATA FROM MEMORY
CARD soft key to show the LOAD DATA
display.
TRACK
MARK/LINE
WAYPOINT/ROUTE
CONFIGURATION
GPS 3D
LOAD DATA display
3. Press ▲ or ▼ to select item to load.
4. Press the EDIT soft key to show the
ON/OFF selection window.
5. Press ▲ to select ON. Press the ENTER
soft key or the [ENTER] key. If the memory
card does not contain the item selected,
the buzzer sounds and ON cannot be
selected.
6. After you select all items desired, press the
LOAD DATA soft key to load data. The
following message appears.
NOW LOADING DATA FROM
MEMORY CARD. DO NOT
TURN OFF THE POWER UNTIL
LOADING COMPLETE.
LOAD DATA message
LOAD
OFF DATA
OFF
EDIT
LOAD
OFF
DATA
OFF
RETURN
After loading is completed, the following
message appears.
COMPLETE LOADING DATA.
PRESS "ENTER" KEY
TO CONTINUE.
COMPLETE message
7. Press the [ENTER] key.
Note on loading data
Track
Since loaded track data is added to internal
track, oldest track will be entered when the
track memory capacity is exceeded.
Waypoint/route
The loaded data substitutes for previously
stored.
Mark/line
The loaded data is added to internal data.
When the mark/line memory becomes full no
marks may be entered.
Configuration
The loaded data replaces current configuration
settings. Press the [ENTER] key to restart. If
the memory card is ejected while loading or
data could not be loaded, press the [ENTER]
key to restart with default settings. Note that
track memory capacity is not saved or loaded.
10-3