Creating Track-Based Routes - Furuno GP-1640F Operator's Manual

Removing waypoints from routes
Removing route waypoints through the
route list
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Press ▲ or ▼ to select the route desired.
3. Press the EDIT ROUTE soft key and then
LOCAL LIST soft keys to show the
waypoint list.
4. Press ▲ or ▼ to select the waypoint you
want to delete.
5. Press the REMOVE WPT soft key.
Removing route waypoints from the plotter
display
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Press ▲ or ▼ to select the route desired.
3. Press the EDIT ROUTE soft key.
4. Press the PLOT soft key to show the plot
screen.
5. Operate the cursor pad to place the cursor
on the waypoint you want to remove from
the route.
6. Press the REMOVE WPT soft key.
7-4
7.4 Creating Track-based
Routes
You can create routes based on your ship's
track by entering waypoints at own ship's
position. This feature is useful when you wish
to retrace a track.
1. Press the [WPT/RTE] key to open the WPT
& ROUTE menu.
2. Press the CREATE VOYAGE BASED
ROUTE soft key to show the SAVE ROUTE
menu.
LENGTH
ABCDEF
WAYPOINTS
ABCDEFGHIJKL
LENGTH
BRIDGE
WAYPOINTS
12:30 24MAY02
LENGTH
FISH01
WAYPOINTS
15:21 24MAY02
HPT001
WAYPOINTS
16:45 24MAY02
GPS 3D
SEARCH FOR
Save route menu
3. Press the NEW soft key to show the new
route number.
Next consecutive route number
ROUTE NAME
0 0 6
COMMENT
GPS 3D
Save route menu for new route
4. If required, you may change the route
name and enter a comment, using the
cursor pad and alphanumeric keys.
SAVE
25.6 nm
ROUTE
35
NEW
56.7 nm
SELECT
ROUTE
6
21.1 nm
3
LENGTH
4.7 nm
1
RETURN
RETURN
_ _ _
SAVE
ROUTE
START
LOG
CANCEL