4. Quick Setup
This chapter guides you through the basic set up of the DP-P2 so that
you can experience its basic feature. In order to enjoy the DP-P2 fully,
please refer to Chapter 9. Advanced Setup.
1. Start Quick Setup
If A/V and antenna connection is complete, press the STANDBY button
to start. The front display window will show "Welcome", "Loading" and
"Start" successively.
If you turn on the DP-P2 for the first time after purchasing, there will be
no digital broadcasting services stored in the DP-P2, it will switch to
SETUP MENU automatically by showing "Service Scan" on the front
display window. Otherwise, you can enter SETUP MENU by pressing the
SETUP button.
If there is a list of the digital broadcasting services stored in the DP-P2,
the front display window will display the service name such as "TEN
Digital" when it is ready to use.
NOTE
If the front display shows "Service Scan", you have to scan the
broadcasting services first. Please refer to the next section of
scanning services.
Quick Setup
19