Hamilton Beach Food Processor Instructions Manual page 7

840181400 ENnv02.qxd:Layout 1
How to Use Slicing/Shredding Disc
Make sure control switch is turned to O
1
Align bowl and base. Turn bowl
clockwise to lock into place.
NOTE: Unit will not work unless
bowl is locked.
5
Cut food to fit food chute. Fill chute
with food.
8/13/09 9:37 AM Page 7
and unit is unplugged. NOTE: Operate using only one blade or disc at a time.
FF
2
Carefully place disc onto motor
shaft with desired side (Slice or
Shred is stamped on each side
of the blade) facing UP .
6
w WARNING
3
Align lid and bowl.
7
Select O or P on control switch.
N ULSE
O : Processor will run continuously.
N
P : For instant on and off control.
ULSE
Laceration Hazard. Handle blade
carefully; it is very sharp.
4
Turn lid clockwise to lock into
place. NOTE: Unit will not work
unless lid is locked.
8
Always use food pusher to feed
food into the chute. NEVER PUSH
FOOD THROUGH CHUTE WITH
HANDS.
7
Meijer.com