dbx DriveRack PX Quick Start Manual page 6

11.
1.
13.
A. Connect the included dbx M2 RTA mic to the
B. Press the RTA INPUT button.

A. Set the level knobs on your subwoofer speakers
to match the position shown on the display.
Press the Data Wheel to load the preset you just created.
RTA MIC INPUT using an XLR cable at least 25' long.
(Note that you also have the option to turn the Data
Wheel to adjust the level shown on the display
to match a preferred setting on your speakers.)
B. Press the NEXT PG button.
PREV PG NEX PG SETUP
SUBHARMONIC COMP LIMITER EQ
PRESET STORE AFS
RECALL UTILITY WIZARD
PREV PG NEXT PG SETUP
SUBHARMONIC COMP LIMITER EQ
PRESET STORE AFS
RECALL UTILITY WIZARD
PREV PG NEXT PG SETUP
COMP/L MITER EQ
SUBHARMONIC
PRESET STORE AFS
RECALL UTILITY WIZARD