Configuring The Lucid Ada 88192 Converter; Understanding Remote Vs. Local Control Of The Lucid Converter - HP xw8600 Hardware Setup Manual

AJA BOB (Front)
to serial port 1 on
Linux workstation
Alternative setup
converted from
analog source

Configuring the Lucid ADA 88192 Converter

You must manually configure the Lucid converter for either remote or local control. This section describes
how to use the controls on the front of the converter to adjust settings, and lists the proper settings for
remote control and for local control.

Understanding Remote vs. Local Control of the Lucid Converter

You can control the converter either remotely or locally. Remote control of the converter means that you
adjust converter settings through the audio preferences of the application. If you want to control the converter
GPI RS 422A RS 422C
AUDIO WC lk CVBS RS.422B RS.422D
Ch. 1/2 In Ch. 3/4 In Ch. 5/6 In Ch. 7/8 In Ch. 1/2 Out Ch. 3/4 Out
AES/EBU Digital Inputs
88192 A/D D/A CONVERTER
7-8
RS-232
WORD CLOCK
INPUT
AES/EBU Digital Outputs
7-8
OUTPUT
ADAT OUT 1-8 ADAT IN 1-8
Lucid ADA 88192
Converter
Digital
outputs
IN
OUT OUT
VTR
IN OUT
1/2 3/4 5/6 7/8
AES/EBU
Audio
In In In In
Out Out Out Out
LTC DIGIT AL A UDIO
IN
Ch. 5/6 Out Ch. 7/8 Out Ch. 1/2 Ch. 3/4 Ch. 5/6 Ch. 7/8 SDI 1/A SDI 2/B
Digital
outputs
5-6 3-4 1-2 8 7 6
Analog Outputs
5-6 3-4 1-2 8 7 6
IN IN IN
OUT O UT
Required for remote
control of converter
Configuring the Lucid ADA 88192 Converter | 33
1/2 3/4 5/6 7/8
AJA
Video MonitorOut
RS-422
Y/G/CVBS Pb/B/Y Pr/R/C
OUT
Ref Loop Ch.1(L) Ch.2(R)
Input from
analog source
Analog Inputs
5 4 3 2 1
5 4 3 2 1
Output to
analog destination