Configuring The Lucid Ada 88192 Converter; Understanding Remote Vs. Local Control Of The Lucid Converter - HP Z800 Hardware Setup Manual

GPI
AUDIO WC lk CVBS
Ch. 1/2 In Ch. 3/4 In Ch. 5/6 In
AJA BOB (Front)
to serial port 1 on
Linux workstation
88192 A/D D/A CONVERTER
RS-232
ADAT OUT 1-8 ADAT IN 1-8
Lucid ADA 88192
Converter
Alternative setup
converted from
analog source

Configuring the Lucid ADA 88192 Converter

You must manually configure the Lucid converter for either remote or local control. This section describes
how to use the controls on the front of the converter to adjust settings, and lists the proper settings for
remote control and for local control.

Understanding Remote vs. Local Control of the Lucid Converter

You can control the converter either remotely or locally. Remote control of the converter means that you
adjust converter settings through the audio preferences of the application. If you want to control the converter
IN OUT
1/2
RS 422A RS 422C
AES/EBU
Audio
In
Out
RS.422B RS.422D LTC
Ch. 7/8 In Ch. 1/2 Out Ch. 3/4 Out Ch. 5/6 Out Ch. 7/8 Out Ch. 1/2
AES/EBU Digital Inputs
7-8 5-6 3-4 1-2
WORD CLOCK
INPUT
AES/EBU Digital Outputs
7-8 5-6 3-4 1-2
OUTPUT
Digital
outputs
IN IN IN IN
OUT OUT OUT O UT
VTR
3/4 5/6 7/8 1/2 3/4 5/6
AJA
Video MonitorOut
In In In
Y/G/CVBS Pb/B/Y Pr/R/C
Out Out Out
DIGIT AL A UDIO
IN OUT
Ch. 3/4 Ch. 5/6 Ch. 7/8 SDI 1/A SDI 2/B Ref Loop
Digital
outputs
Input from
analog source
Analog Inputs
8 7 6 5 4 3 2
Analog Outputs
8 7 6 5 4 3 2
Output to
analog destination
Required for remote
control of converter
Configuring the Lucid ADA 88192 Converter | 25
7/8
RS-422
Ch.1(L) Ch.2(R)
1
1