Watching To A Disc; Operate The Dvd Player Menu - Clarion NZ503 User Manual

Watching to a disc

1. To load a disc:
Insert the disc into the center of the insertion slot the
label side facing up.
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
Note:
disc in the mechanism or the unit may require service.
2. Disc starts playing automatically.
WARNING
Some videos may be recorded at higher
than desired volume levels. Increase the
volume gradually from the minimal setting
after the video has started.
Ejecting a disc
mode then switches to the Tuner mode.
seconds, the disc is automatically reloaded. In this
case, the play mode will remain in the Tuner mode.
Note:
may damage a disc.
Showing DVD Player mode screen
engaged.
Touch any place of the screen to display DVD Video
menu touch the screen again to return the playback
screen. The display will return to the playback screen,
if you do not touch the screen for 10 seconds.
11
1 2 3 4
18 NZ503
[ ] button. The play
9
10
5 6 7 8
12 13 14

Operate the DVD Player menu

You can select the button items displayed in the DVD
menu by directly touching it.
Play/Pause Playback
1. Touch [ ] button to pause during playback.
2. Touch [ ] button again to resume playback.
Skip (Search) a Chapter
[ ] or [ ] button during playback.
Chapters are skipped down or up from current
locations, as many times as the button is pressed, and
playback starts.
Skip use seek bar
[ ] on seek bar and drag it to any
position where you want to start playback.
15 16 17